50mm 200-500kg/h 18.5kw Biomass Briquetting Machine with CE certifiate
Product Description:
The coal rod extruder is referred to as the coal rod machine, which uses the principle of screw extrusion to compress the prepared pulverized coal into a coal rod with a certain strength.
The coal rod machine is a main equipment in the complete set of equipment in the fuel forming section of the ammonia fertilizer plant and the gas production system of the gas plant. It squeezes the fuel pulverized coal into a round (or hexagonal or square) coal with a certain strength. Rods, a new process of burning in the gas furnace to replace the traditional process of burning lump coal and briquettes to produce gas. The use of coal rod machine to make coal rods can make full use of coal powder, and there is no need to add lime in the production process, which reduces the cost of fuel, increases the calorific value of coal, and has high economic benefits. In addition, the equipment is small in size and does not need Carbonization drying equipment is required, no steam is required, investment is saved, and floor space is reduced. At the same time, it provides a reliable guarantee for manufacturers to effectively use cheap coal powder instead of high-priced coal lumps, thereby reducing production costs and improving economic benefits.
Coal stick machine installation and commissioning
1. Before installation, all parts must be thoroughly cleaned to remove rust that has occurred during transportation or storage for a long time, and check whether there is any damage to the parts.
2. Lubricate each lubricating part before the test machine, and the amount of oil is moderate. Check all bolts for looseness and tighten. Jog the machine and observe whether there are foreign objects or abnormal sounds. Everything is confirmed to be correct before driving. And check that the direction of rotation is correct.
3. After the machine runs dry for 3 to 5 minutes, it can be put into trial production when everything is normal. The new machine should be fed evenly, with moderate dryness and humidity (generally 12% to 15% water content).
The use and maintenance of coal rod machine
1. Before starting each shift, check whether the rotating parts are flexible and whether there is any abnormal noise. The machine can be fed into production after 2~3 minutes of empty operation.
2. The raw material must be processed, the particle size is less than 3mm, add water, add binder, curing agent, stir and retting for 24 hours before use.
3. If the feeding port is blocked, use wooden or bamboo strips to clear it, and do not use metal rods.
4. The bearings of the rotating parts of the machine should be injected with lubricating oil regularly, and the temperature of the bearing parts should not exceed 60 degrees.
5. Stop unloading before stopping the machine, stop the machine after the material in the cylinder is squeezed out, disassemble the machine head, clean it and reinstall it, so that it can be used after get off work.
6. In order to prevent the motor from overloading, it is recommended that the user install a current and voltage meter, and adjust the feeding amount and water content according to the current and voltage meter.
Features:
- Product Name: Biomass Briquetting Machine
- Dimension: 1650*1000*1700mm
- Density of Briquettes: 1.1-1.3g/cm3
- Application: Industrial Boilers, Home Heating, Etc.
- Power: 18.5kw
- Keywords: briquetting machine for biomass, BiomassPressingMachine, briquetting machine for biomass
Technical Parameters:
| Raw Materials | Wood, Straw, Sawdust, Rice Husk, Peanut Shell, Etc. |
| Model | 50A |
| Motor power | 18.5kw |
| capcaity | 260-300kg/h |
| package size | 162*0.65*1.62 |
| Briquettes Shape | Hexagonal, Cylindrical, Square, Etc. |
| Application | Industrial Boilers, Home Heating, Etc. |
| Size of Briquettes | 50mm |
| Heating Value | 3800-4800Kcal/kg |
Applications:
FAQ:
- Q: What is the Brand Name of Biomass Briquetting Machine?
- A: The Brand Name of Biomass Briquetting Machine is Zhongdebao.
- Q: What is the Model Number of Biomass Briquetting Machine?
- A: The Model Number of Biomass Briquetting Machine is EW50A.
- Q: Where is the place of origin of Biomass Briquetting Machine?
- A: The place of origin of Biomass Briquetting Machine is Henan, China.
- Q: What certifications does Biomass Briquetting Machine have?
- A: Biomass Briquetting Machine has CE, SGS, BV certifications.
- Q: What is the minimum order quantity for Biomass Briquetting Machine?
- A: The minimum order quantity for Biomass Briquetting Machine is 1.
